Research Article Open Access

Simulink Model of Direct Torque Control of Induction Machine

H.F. Abdul Wahab and H. Sanusi

Abstract

Direct torque control (DTC) is one of the most excellent control strategies of torque control in induction machine. It is considered as an alternative to the field oriented control (FOC) or vector control technique. These two control strategies are different on the operation principle but their objectives are the same. They aim to control effectively the torque and flux. Torque control of an induction machine based on DTC strategy has been developed and a comprehensive study is present in this research. The performance of this control method has been demonstrated by simulations performed using a versatile simulation package, Matlab/Simulink. Several numerical simulations have been carried out in a steady state and transient operation on a speed control mode.

American Journal of Applied Sciences
Volume 5 No. 8, 2008, 1083-1090

DOI: https://doi.org/10.3844/ajassp.2008.1083.1090

Submitted On: 11 October 2007 Published On: 31 August 2008

How to Cite: Wahab, H. A. & Sanusi, H. (2008). Simulink Model of Direct Torque Control of Induction Machine. American Journal of Applied Sciences, 5(8), 1083-1090. https://doi.org/10.3844/ajassp.2008.1083.1090

  • 3,301 Views
  • 3,266 Downloads
  • 40 Citations

Download

Keywords

  • Direct torque control
  • induction machine
  • vector control
  • Matlab/Simulink