@article {10.3844/ajassp.2009.219.223, article_type = {journal}, title = {Strength Modeling of High-Strength Concrete with Hybrid Fibre Reinforcement }, author = {Ravichandran, A. and Suguna, K. and Ragunath, P. N.}, volume = {6}, year = {2009}, month = {Feb}, pages = {219-223}, doi = {10.3844/ajassp.2009.219.223}, url = {https://thescipub.com/abstract/ajassp.2009.219.223}, abstract = {The low tensile strength and limited ductility, the unavoidable deficiency, of concrete can be overcome by the addition of fibres. High strength concrete (HSC) of 60 MPa containing hybrid fibres, combination of steel and polyolefin fibres, at different volume fraction of 0.5, 1.0, 1.5 and 2.0% were compared in terms of compressive, splitting tensile strength and flexural properties with HSC containing no fibres. Test results showed that the fibres when used in hybrid form could result in enhanced flexural toughness compared to steel fibre reinforced concrete [HSFRC]. The compressive strength of the fibre-reinforced concrete reached maximum at 1.5% volume fractions and the splitting tensile strength and modulus of rupture improved with increasing volume fraction. Strength models were established to predict the compressive and splitting tensile strength and modulus of rupture of the fibre-reinforced concrete. The models give prediction matching the measurements.}, journal = {American Journal of Applied Sciences}, publisher = {Science Publications} }