TY  - JOUR
AU  - Rittidech, A. 
AU  - Tunkasiri, T. 
PY  - 2009
TI  - Influence of Heat Treatment in Sintering Process on Characteristics of Al2o3-Zro2 Ceramics Systems 
JF  - American Journal of Applied Sciences
VL  - 6
IS  - 2
DO  - 10.3844/ajassp.2009.309.312
UR  - https://thescipub.com/abstract/ajassp.2009.309.312
AB  - Al2O3-ZrO2 ceramics containing 5-50 mol% ZrO2 were prepared by solid state reaction method. The bulk density, average grain size and microhardness of Al2O3-ZrO2 ceramics system as function of ZrO2 content were investigated. The dense Al2O3-ZrO2 ceramics were successfully by means of carefully control processing parameters that include sintering temperature and heating/cooling rates. These ceramics with higher ZrO2 content was obtained high bulk densities and small grain sizes. However, the high hardness values were exhibited from Al2O3-ZrO2 ceramics with dopants ZrO2 between 1-10mol% and its tend to decrease with concentration of ZrO2. It can be found that the fast heating/cooling rates are controlled grain growth and obtained high hardness in materials. The results gave good correlation between stoichiometry characteristics, heating/cooling rates in sintering and microstructure of fabricated dense and mechanical properties.